BIOS release 1.1 for IS7-E2 1.0


Release information:

[ENGLISH]

1. Fixed the problem that the system cannot boot into Windows if
   1) The OS is installed in the SATA hard disk when both the SATA and
      PATA hard disks are present.
   2) The PATA hard disk is removed after the OS installation.
2. Update CPU micro code.
3. Update Intel OSB logo.
4. Change the default year to 2004.
5. Add "Full Screen LOGO Show" option instead of "Intel OnScreen Branding".
6. Revised some help information.
7. Revised some DMI information.
8. BIOS compile date: 02/24/2004


[中文]

1. 修正當 SATA 及 PATA 硬碟同時存在時，並將作業系統安裝在SATA硬碟上，
   之後再將 PATA 硬碟移除後無法開機之問題。
2. 更新 CPU 的 micro code。
3. 更新 Intel OSB logo。
4. 更改預設年份為 2004。
5. 新增 "Full Screen LOGO Show", 並取代 "Intel OnScreen Branding" 選項。
6. 修正部分 BIOS 內求助資訊。
7. 修正部分 DMI 資訊。
8. BIOS 日期： 02/24/2004。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "IS7L11.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================