VT82C580 Device Driver & Utility Release History 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 旼컴컴컴컴컴컴컴컴컴컴컴커 � Release Version 2.1.23 � 읕컴컴컴컴컴컴컴컴컴컴컴켸 * 97/07/11 (Ver 2.0.0) * WIN95\*.* First edition for 580. * 97/07/11 (Ver 2.0.1) * WIN95\*.* Support VCD. Reduce CD-ROM compatilbity problem. Fix Maxtor 82560A4 boot problem. Check Vendor ID in setup program. * 97/08/04 (Ver 2.0.2) * WIN95\SETUP.EXE Change "VIA580 Driver" to "VIA Bus Master PCI IDE Controller" in Device Manager The warning box will appear when reinstalling driver. Remove DMA check box in the Device Manager. * 97/08/04 (Ver 2.0.3) * WIN95\*.* DVD is supported. Turn off DMA mode if PIO turn on on any disk drives to patch 586 chipset timing problem. * 97/08/21 (Ver 2.0.4) * WIN95\README.TXT Add Readme.txt file. * 97/08/09 (Ver 2.1.0) * WIN95\*.* Fix read command block count problem happen on NT. WINNT\*.* First cut for WinNT 4.0. * 97/08/13 (Ver 2.1.1) * SETUP.EXE Fix Win95 "An error occurred during the move data process : -1" setup error. Fix Win95 "VIA bus master driver is not started." setup error. Fix WinNT VIA driver Start Errror. * 97/09/06 (Ver 2.1.2) * WIN95\*.* Support multiword & Ultra DMA. WINNT\*.* Fix Ultra DMA Hard drive problem. Support multiword & Ultra DMA. Fix VCD play problem. * 97/09/12 (Ver 2.1.3) * WINNT\*.* Fix HCT 7.1 Auto test failed problems. * 97/10/17 (Ver 2.1.4) * SETUP.EXE Display device types on DMA enable/disable menu. WIN95\*.* Fix HCT 7.x MCI test failed problems (PIO/DMA). * 97/10/24 (Ver 2.1.5) * WIN95\*.* Fix HCT 7.x MCI test failed problems (PIO/DMA) for some CD-ROM which use the Interrupt line. * 97/11/03 (Ver 2.1.6) * WIN95\VIAIDE.VXD Fix 120MB Floppy volumn assigned error. * 97/11/06 (Ver 2.1.7) * SETUP.EXE Extract the PCI\DEV0x information dynamically WIN95\*.* in order to support different DEV0x in PCI bus. * 97/11/18 (Ver 2.1.8) * WIN95\*.* Fix Copy-Compare failed problem where it could not terminate the DOS-Prompt windows. Fix the CD autosense failed problem. * 97/11/27 (Ver 2.1.9) * SETUP.EXE Fix SCSI hard drives existing then install error. WIN95\*.* Patch Seagate ST325xxA Ultra DMA errors. WINNT\*.* Patch Seagate ST325xxA Ultra DMA errors. * 97/12/03 (Ver 2.1.10) * WIN95\*.* Fix Pioneer DR-A12X CD-ROM detection error. * 97/12/06 (Ver 2.1.11) * WIN95\*.* Fix Create InFra 36 remote control AP recognization failed error. Patch Seagate ST332xxA & ST365xxA Ultra DMA problems. * 97/12/06 (Ver 2.1.12) * WIN95\*.* Patch only Seagate ST33220A & ST36540A Ultra DMA problems. WINNT\*.* Patch only Seagate ST33220A & ST36540A Ultra DMA problems. * 97/12/19 (Ver 2.1.13) * SETUP.EXE Reboot only one time after Install/Uninstall. WIN95\*.* Fix Pioneer(12X) CD-ROM detecting failure problem. Fix Early-CD Pro CD-R/RW detecting failure problem. Fix Creative Infra 3600 playing audio failure problem. WINNT\*.* Fix Pioneer(12X) CD-ROM detecting failure problem. Fix Seagate ST36540A coexisting with other device failure problem. * 97/12/24 (Ver 2.1.14) * SETUP.EXE Display the disk capability for PIO/DMA/UDMA on the DMA Enable/Disable screen. WIN95\*.* Fix Samsong CD-Master 20E SCR-2030 & workaround LG GCD-R540B detecting errors. Fix Creative DVD play failed problem in DMA. WINNT\*.* Fix Samsong CD-Master 20E SCR-2030 & workaround LG GCD-R540B detecting errors. * 97/01/06 (Ver 2.1.15) * WIN95\*.* Fix ATAPI floppy drive volume assigned error when the VIA driver is hooked first. * 97/02/09 (Ver 2.1.16) * SETUP.EXE Display "UDMA" string on the setup screen. WIN95\*.* Enhance the CD-ROM performance on WinBench. Fix TOSHIBA CD-ROM XM-5602B DMA boot failed problem (Single Word DMA). Workaround Samsong CD-ROM SCR-2430 & SCR-2030 VCD play still problem. Workaround UDMA HD & AOpen CD-932E on the same channel problem. WINNT\*.* Fix audio CD playback problem (NT4.0). * 97/02/18 (Ver 2.1.17) * SETUP.EXE Fixing PCI-ID 0x14 identify error. WIN95\*.* Fix DVD play error. Fix UDMA HD & AOpen CD-932E on the same channel problems. Fix IOMaegaZip 100 coexisting problem on printer port. WINNT\*.* Fix CD-ROM play problem on TEAC 24X, VUEGO 24X, Toshiba 16X for WinNT 3.51 * 97/03/03 (Ver 2.1.18) * SETUP.EXE Add the dosstart.bat to restore the MSCDEX.EXE. WIN95\*.* Fix the LuxSonor LS220 DVD can't play DVD problem. Fix Samsung CD-ROM playing VCD failed in DMA mode. WINNT\*.* Fix Toshiba XM-5602B playing failed problem. * 97/03/06 (Ver 2.1.19) * WIN95\*.* Fix BTC CDR read audio track failed problem. Fix exception fault #0 problem when returns from suspend mode to resume mode. * 97/03/09 (Ver 2.1.20) * WINNT\*.* Fix Toshiba XM-5602B hanging problem. * 97/03/17 (Ver 2.1.21) * SETUP.EXE Leave VIAIDE.INF in INF directory. WIN95\*.* Fix page fault problem when some VGA driver is installed after VIA driver. Limitation for LunxSonor LS220 DVD could play on the channel without HD. * 97/03/24 (Ver 2.1.22) * SETUP.EXE Support installation on Win98. WIN95\*.* Support driver on Win98 * 97/04/10 (Ver 2.1.23) * WIN95\VIAIDE.VXD Fix LS-120 identification failed problem.WIN WIN95\VIADSK.MPD Fix Samsung WA32163A boot failed problem. Workaround LEOPTICS CDD-1240 copy-compare failed problem. Fix system hang problem when the MSCDEX.EXE is hooked on autoexec.bat. WINNT\*.* Workaround LEOPTICS CDD-1240 copy-compare failed problem.