DOCUMENT:Q165030  06-MAY-1999  [exchange]
TITLE   :XCON: Sample Configuration between Exchange and MailBus 400
PRODUCT :Microsoft Exchange
PROD/VER:4.0 5.0 5.5
OPER/SYS:
KEYWORDS:kb3rdparty

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Exchange Server, versions 4.0, 5.0, 5.5 
-------------------------------------------------------------------------------


SUMMARY
=======

The following information should allow you to make a 1988 connection between
Microsoft Exchange Server and Mailbus 400 using TCP/IP as the transport
mechanism. It is recommend that you do this in the order specified, but it is
not required. The information below covers the trouble spots and the parameters
which must be set in a non-intuitive or non-default way.

MORE INFORMATION
================

WARNING: Using Registry Editor incorrectly can cause serious problems that may
require you to reinstall your operating system. Microsoft cannot guarantee that
problems resulting from the incorrect use of Registry Editor can be solved. Use
Registry Editor at your own risk.

For information about how to edit the registry, view the "Changing Keys And
Values" Help topic in Registry Editor (Regedit.exe) or the "Add and Delete
Information in the Registry" and "Edit Registry Data" Help topics in
Regedt32.exe. Note that you should back up the registry before you edit it.

The system in this examples uses the following configuration:

   IP Address: 204.5.25.76
   Hostname: IGPAA2.IGA.COM
   TSAP MTA88-DECUS1 MTA88-DECUS1
   SSAP MTA MTA
   PSAP MTA MTA

To make a 1988 connection between the MailBus 400 system and Exchange Server,
follow these steps:

1. On the MailBus 400 system, define your Message Transfer Agent (MTA) and note
   your MTA presentation address.

   NCL>SHO MTA PRESENTATION ADDR Node 0 MTA at 1996-05-06-15:16:52.751+00:00Iinf 
   Characteristics Presentation Address="""MTA""/""MTA""/""MTA88-IGPAA2""/RFC1006+
   IGPAA2.IGA.COM,RFC1006" 

2. Similarly, define the PEER MTA (in other words, the Exchange Server) to
   MailBus 400, and make note of the presentation address. At the end of this
   article is attached the NCL script we are using to define our Exchange Server
   computer (called DECUS1).

   NCL>SHO MTA PEER MTA [TYPE=MANUALLY CONFIGURED,NAME="nnnn"] 
   PRES ADDR Node 0 MTA Peer MTA [ Type = Manually Configured , Name = "nnnn" ] at
   1996-05-06-15:27:04.798+00:00Iinf 
   Characteristics Presentation Address = """MTA""/""MTA""/""MTA88-DECUS1""
   /RFC1006+204.5.25.76,RFC1006" 

3. Now we will use those presentation addresses to tell Exchange how to talk to
   MailBus 400. Create the TCP transport stack definition or if it already
   exists, click on it (under Server in the Microsoft Exchange Administrator
   program) to modify it. The OSI address information must look like this:

      T selector:MTA88-DECUS1
      S selector:MTA
      P selector:MTA

   Get these values from step 2 above - the presentation address of the PEER in
   MailBus 400. They are case sensitive so use upper case for everything.

4. Create your X.400 connector, or if it already exists, modify it. On the STACK
   tab of the X.400 connector, you must set the fields as follows:

      IP address: 1.2.3.4 (put in the address of the MB400 machine)
      Outgoing OSI address information
         T selector:MTA88-IGPAA2
         S selector:MTA
         P selector:MTA
      Incoming OSI address information
         T selector:MTA88-IGPAA2
         S selector:MTA
         P selector:MTA
      Use expedited data: Yes

   Both sets of selectors are identical, this is crucial. You got these values
   from step 1 above.

5. Click on the X.400 connector's ADVANCED tab and verify the following
   settings:

      MTA conformance: 1988 normal mode
      X.400 link options Allow BP-15 [in addition to BP-14]: Allow MS-Exchange
      contents: Two way alternate.

6. After you've saved all of the X.400 connector changes, start the Windows NT
   Registry Editor and go to:

      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeMTA\Parameters

   Find the Supports 2K TPDU parameter, double-click it, and set it to 1.

7. Check your Local/Remote passwords. Specify the MTA name/password on the
   Exchange MTA\General Tab.

8. Make sure the X400 address is configured correctly.

9. Restart the Exchange MTA for the parameter change to take effect.

The 1988 connection should now be made.

Administrator of the DECMAILBUS 400 should know how to configure the NCL Script.
Refer the mailbus documentation for more information.


Additional query words: Mailbus400 exchange configuration x400
======================================================================
Keywords          : kb3rdparty 
Technology        : kbExchangeSearch kbExchange500 kbExchange550 kbExchange400 kbZNotKeyword2
Version           : 4.0 5.0 5.5
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.