DOCUMENT:Q175483  11-MAR-1999  [exchange]
TITLE   :XCON: Configuration Sample - Exchange X.400 Connector & Infonet
PRODUCT :Microsoft Exchange
PROD/VER:WinNT:5.0
OPER/SYS:
KEYWORDS:kbusage

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Exchange Server, version 5.0 
-------------------------------------------------------------------------------

SUMMARY
=======

This article describes a sample configuration between Microsoft Exchange
Server's X.400 Connector and the Infonet X.400 message transfer agent (MTA)
(net-BSD) platform.

The connection data presented in this article is sample data used as an example.
For further information, please consult your Infonet technical references.

MORE INFORMATION
================

To successfully connect Microsoft Exchange Server and Infonet by an X.400
connector, both sides of the connection must be configured properly. The
following sample configuration is intended to be used only as a guideline. Your
configuration will vary.

Exchange Server Connection Information
--------------------------------------

Exchange MTA name : Highlanders
Exchange TSAP : None
Exchange IP address : 200.200.200.1

Infonet Connection Information
------------------------------

INFONET MTA name : Infonet
Infonet TSAP : 1032 (text value)
Infonet IP Address : 200.200.200.10

Exchange Server Configuration Example
-------------------------------------

TCP/IP Transport stack values

   TSEL
   SSEL
   PSEL

X.400 Connector Properties
--------------------------

General Tab:

   Remote MTA Name : Infonet
   Remote MTA Password : no password used.

Stack tab:

   IP address : 200.200.200.10 "This is the Infonet IP address."

   (Outgoing OSI Information)

   T selector : 1032 (Display in text)
   S selector :
   P selector :

   (Incoming OSI Information)

   T selector : 1032
   S selector :
   P selector :

Override Tab:

   All left in default values. Local MTA name may be used if the Infonet MTA
   refers to the Exchange Server MTA by a name other than the Windows NT server
   name. This configuration does not use any override values.

Advanced TAB:

   MTA conformance: 1988 normal mode
   X.400 Link options: Allow BP-15 (in addition to BP-14)
   Two way alternate: unchecked
   Allow Msexchange Content: Unchecked

Address Space:

   Address space should contain the routing information. For example:

      C=us;a=test;p=infonet;

Connected Site:

   This entry should be left blank. Connected sites are used between Exchange
   Server sites only.

Infonet Configuration Example
-----------------------------

This file is the configuration file, residing on the Infonet side and defining
the connection to the Exchange Server MTA.

      mtamaint: print conn
      Entry Name : HIGHLANDERS
      Connection : HIGHLANDERS
      Status : enabled
      Operating Hours : 00:00-23:59
      Cost : 0
      Out Connection Info:
      dm=mono,rts=88,pp=on,rpsap="1032"/Internet=200.200.200.1,
      lpsap="1032"/Internet=200.200.200.10,cp=30,wn=5

      Enable Alternate : true
      In Connection Info: dm=mono,rts=88,rpsap=Internet=200.200.200.1,
      lpsap=Internet=200.200.200.10,cp=30,wn=5

      Comment: This is the new connection to Microsoft Exchange Server MTA.

      mtamaint: print mta
      Entry Name: HIGHLANDERS
      MTA: HIGHLANDERS
      Queue File: _HIGHLANDERS
      Queue Size: 0 (rep=0 high=0 normal=0 low=0 def=0)
      Cost: 0
      Management Domain: C=us/ADMD=test/PRMD=highlanders/ 
      Connection: highlanders
      Protocol: 88p1
      Schedule Info: high=-1:0:0:E,normal=-1:0:0:E,low=-1:0:0:E,report=-1:0:0:
      E,poll=1:0:0:E,any=0:0:0:E,max_txps=1

      Comment: New MTA name

Domain routing segment Route
----------------------------

   C=us/ADMD=test/PRMD=highlanders/ HIGHLANDERS
   C=us/ADMD=test/PRMD=infonet @local


Additional query words: infonet 51 security x.400 setup howto
======================================================================
Keywords          : kbusage 
Technology        : kbExchangeSearch kbExchange500 kbZNotKeyword2
Version           : WinNT:5.0
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.