DOCUMENT:Q242581  27-APR-2000  [schedplus]
TITLE   :Y2K Analyzer Tool Does Not Recognize Schedule+ 7.0a
PRODUCT :Microsoft Schedule+ for Windows
PROD/VER:WINDOWS:7.0a
OPER/SYS:
KEYWORDS:

======================================================================

-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Schedule+ for Windows, version 7.0a 
-------------------------------------------------------------------------------

SYMPTOMS
========

The Microsoft Year 2000 Product Analyzer (Y2K Analyzer) tool identifies
Microsoft Schedule+ version 7.0a as Schedule+ version 7.0. You should check
which version of Schedule+ 7.0 you are running by clicking About Microsoft
Schedule+ on the Help menu.

If you have version 7.0a and you apply the software update for version 7.0, you
will receive the following error message:

   Schedule+ could not load a required dll. Try running Schedule+ setup again.

CAUSE
=====

There are three separate Y2K software updates for Schedule+, one for each of the
three versions, 7.0, 7.0a, and 7.5. Applying the incorrect update causes this
problem.

RESOLUTION
==========

Reinstall Schedule+ from its original source, and verify the correct version by
clicking "About Microsoft Schedule+" on the Help menu. Then apply the correct
software update for that version.

STATUS
======

Microsoft has confirmed this to be a problem in the Microsoft products that are
listed at the beginning of this article.

MORE INFORMATION
================

The Y2K Analyzer is a tool to help assess the readiness of your computer system
by conducting an inventory of Microsoft software installed on your computer. The
Y2K Analyzer scans your hard drive and creates a report listing the Y2K
readiness status of all Microsoft software found on your computer.

The Y2K Analyzer mistakenly reports Schedule+ version 7.0a as Schedule+ version
7.0. This is significant because there are separate Y2K updates for Schedule+
7.0, 7.0a, and 7.5. If the 7.0 update is incorrectly applied to version 7.0a,
the error condition described above occurs.

REFERENCES
==========

For additional information on obtaining the Year 2000 software updates for
Schedule+, click the article number below to view the article in the Microsoft
Knowledge Base:

   Q197195 XCLN: Schedule+ Two-Digit Date Assumes Twentieth Century

For more information about how Microsoft products are affected by year 2000 (Y2K)
issues, please see the following Microsoft World Wide Web site:

   http://www.microsoft.com/technet/year2k/product/product.asp

Additional query words:

======================================================================
Keywords          :  
Technology        : kbScheduleSearch kbSchedule700a
Version           : WINDOWS:7.0a
Issue type        : kbprb

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.