DOCUMENT:Q154485  15-MAR-2000  [iis]
TITLE   :Disabling Keep Alive Connections in IIS 1.0
PRODUCT :Internet Information Server
PROD/VER:winnt:1.0
OPER/SYS:
KEYWORDS:kbnetwork

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Internet Information Server 1.0 
-------------------------------------------------------------------------------


SYMPTOMS
========

Microsoft Internet Information Server (IIS) allows "keep alive connections"
(that is, persistent connections) by default. If clients do not close keep alive
connections, this may result in a large number of TCP connections in the
ESTABLISHED state on the IIS server. These connections can be identified by
running "netstat -n" to see whether a large number of connections exist in the
ESTABLISHED state.

Because IIS allows keep alive connections by default, any HTTP requests from a
client can result in connections to the server that are not closed until they
are either reset by the client, or timed out by the server. The default timeout
for established connections in IIS is 900 seconds (15 minutes).

CAUSE
=====

IIS allows keep alive connections by default.

MORE INFORMATION
================

IIS allows keep alive connections as an optimization to reduce the total number
of TCP connections a client needs to download all the elements (Images, Audio,
etc.) defined on a page. Keep alive connections allow clients to re-use
established TCP connections to the HTTP server to download several elements on a
page. Without keep alive connections a separate TCP connection is established to
get each element on a page, increasing the load on the HTTP server.

NOTE: A description of the TCP state machine can be found in Internet RFC

1. A description of the HTTP/1.0, and HTTP/1.1 protocol can be found

on http://www.w3.org/pub/WWW/Protocols

RESOLUTION
==========

Obtain the fix described below in the STATUS section, and then modify the
registry according the following steps. W3svc.dll was modified to accept a
registry entry that disables support for keep alive connections.

The new registry entry is AllowKeepAlives.

WARNING: Using Registry Editor incorrectly can cause serious, system-wide
problems that may require you to reinstall Windows NT to correct them. Microsoft
cannot guarantee that any problems resulting from the use of Registry Editor can
be solved. Use this tool at your own risk.

1. Run "Net Stop w3svc"

2. Run Registry Editor (REGEDT32.EXE).

3. From the HKEY_LOCAL_MACHINE subtree, go to the following key:

      \SYSTEM\CurrentControlSet\Services\W3svc\Parameters

   The parameters described below are located under this Registry subkey.

   The following describes a new value for the W3SVC service parameters key that
   can only be set by adding an entry in Registry Editor. This value entry does
   not appear by default in the Registry, so you must add an entry if you want
   to change its default value. The W3SVC service must be restarted for changes
   to take effect.

   AllowKeepAlives
      Data Type = REG_DWORD
      Value:
               0 - Do not allow keep alive connections.
     (Default) 1 - Allow keep alive connections.

4. Run "Net Start w3svc"

STATUS
======


Microsoft has confirmed this to be a problem in Windows NT version 3.51. A fix to
this problem is in development, but has not been regression-tested and may be
destabilizing in production environments. Microsoft does not recommend
implementing this fix at this time. Contact Microsoft Product Support Services
for more information on the availability of this fix.



Additional query words: prodiis

======================================================================
Keywords          : kbnetwork 
Technology        : kbiisSearch kbiis100
Version           : winnt:1.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.