DOCUMENT:Q317543  23-JUL-2002  [msnetwork]
TITLE   :How To Connect To MSN Using Macintosh Remote Access
PRODUCT :The Microsoft Network
PROD/VER::
OPER/SYS:
KEYWORDS:kbnetwork kbsetup kbPubTypeMSN

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - MSN Internet Access for Macintosh, version 1.0 
-------------------------------------------------------------------------------

SUMMARY
=======

This article describes how to configure Macintosh OS 9.x to use your MSN
Internet Access account--with a Remote Access connection.

The information in this article applies to:

 - Macintosh OS 8.6

 - Macintosh OS 9.x

MORE INFORMATION
================

The minimum requirements for connecting to MSN Internet Access are as follows:

 - Macintosh OS 9.x

 - A paying MSN Internet Access account

 - A modem with the minimum baud rate of 28.8 Kbps

 - Internet Explorer 5.x

 - Outlook Express 5.0.4

To obtain the local dial-up numbers for your area, follow the instructions on the
following MSN Web site:https://rac.msn.com/popcheck/

To create a Remote Access connection in Macintosh OS 9.x

1. On the Apple menu, select Control Panels, and click Remote Access.

2. On the File menu, click Configurations.

3. Select any configuration listed, and then click Duplicate.

4. Type a name for the new configuration, and then click OK.

5. Select the configuration, and then click Make Active.

6. Click Registered User, and then type your MSN e-mail address in the Name box
   as MSN/Member_ID@msn.com. (example: MSN/msnuser@msn.com)

7. If you do not want to enter your password each time you sign into MSN, enter
   your password and then select the Save password box.

8. In the Number box, type the local access number for your area, as it would be
   dialed on the phone.
   Note: Please choose your access numbers carefully; you will not be reimbursed
   for telephone charges incurred while connected to MSN Internet Access.

9. On the Remote Access menu, click TCP/IP.

10. After Connect via:, select PPP.

11. After Configure:, select Using PPP Server.

12. Close the TCP/IP window.

13. When prompted to Save changes to the current configuration?, click Save.

14. In the Remote Access window, click Connect.

Additional query words: kbimu MSN Macintosh mac OSX OS X ten connect IE internet outlook OLEXP OE

======================================================================
Keywords          : kbnetwork kbsetup kbPubTypeMSN 
Technology        : kbMSNSearch
Version           : :
Issue type        : kbhowto

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.