DOCUMENT:Q230337 24-JUN-1999 [mspress] TITLE :MCSE Readiness Review - Exam 70-058: Networking Essentials Comme PRODUCT :Microsoft Press PROD/VER: OPER/SYS: KEYWORDS:kbdocfix kbdocerr ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - MCSE Readiness Review Exam 70-058: Networking Essentials ------------------------------------------------------------------------------- SUMMARY ======= This article contains comments, corrections, and information about known errors relating to the Microsoft Press book "MCSE Readiness Review - Exam 70-058: Networking Essentials," ISBN 0-7356-0536-x. Contents: - Pages 217 - 218: Answer For Question 70-058.03.01.005 Incorrect - Pages 231 and 232: Unclear Question and Text Correction - Pages 311 and 312: Bad Question - False Error Message: Tests Have Expired MORE INFORMATION ================ Pages 217 - 218: Answer For Question 70-058.03.01.005 Incorrect --------------------------------------------------------------- Page 218, answer for question 70-058.03.01.005: Change answer from "B" to "D." Microsoft Windows NT does not allow password protected shares. Only Microsoft Windows 95 and Windows 98 allow password protected shares. Pages 231 and 232: Unclear Question and Text Correction ------------------------------------------------------- Page 231, Question 70-058.03.02.004: Correction: Remove the disk channel reference. On the seventh line of text on both page 231 and 230 there is an error. Change: "You propose to implement disk striping with parity." To: "You propose to implement disk stripping with parity." Pages 311 and 312: Bad Question ------------------------------- Page 311, fourth line: Change: "T connector = 0 ohms (measured center conductor to center conductor)" To: "T connector = 0 ohms (measured center conductor to outer conductor)" Page 312, answer B: Change to: "B. Correct: The T connector is shorted. A T connector should have infinite resistance between the center conductor and the outer conductor. The only way there would be 0 ohms of resistance is if the T connector is shorted between the center and outer conductors." False Error Message: Tests Have Expired --------------------------------------- After the date 9/9/99, you may receive a message stating: Tests Have Expired. Contact Customer Service. Once you click OK, the test splash screen appears. You can start and run all facets of the test without error. This error message is incorrect. The tests have not expired and you should be able to perform them without error. Microsoft Press is committed to providing informative and accurate books. All comments and corrections listed above are ready for inclusion in future printings of this book. If you have a later printing of this book, it may already contain most or all of the above corrections. Additional query words: ms_press press 0-7356-0536-x ====================================================================== Keywords : kbdocfix kbdocerr Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.