======================================================================
  Microsoft(R) Product Support Services Application Note (Text File)
     WA0952: MICROSOFT MAIL REMOTE FOR WINDOWS ATTMAIL.DLL VERSION
                           3.2.0.4004 UPDATE
======================================================================
                                                   Revision Date: 2/94
                                                       1 Disk Included

The following information applies to Microsoft Mail Remote for
Windows, version 3.2.

-----------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY     |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an Application |
| Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER      |
| EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED      |
| WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR       |
| PURPOSE. The user assumes the entire risk as to the accuracy and    |
| the use of this Application Note. This Application Note may be      |
| copied and distributed subject to the following conditions:  1) All |
| text must be copied without modification and all pages must be      |
| included;  2) If software is included, all files on the disk(s)     |
| must be copied without modification (the MS-DOS(R)  utility         |
| diskcopy is appropriate for this purpose);  3) All components of    |
| this Application Note must be distributed together;  and  4) This   |
| Application Note may not be distributed for profit.                 |
|                                                                     |
| Copyright (C) 1993-1994 Microsoft Corporation. All Rights Reserved. |
| Microsoft and MS-DOS are registered trademarks and Windows is a     |
| trademark of Microsoft Corporation.                                 |
| AT&T is a registered trademark of American Telephone and Telegraph  |
| Company.                                                            |
|---------------------------------------------------------------------|

Introduction
------------

The disk provided with this Application Note contains ATTMAIL.DLL, a
replacement for the ATTMAIL.DLL file that is included with version 3.2
of Microsoft Mail Remote for Windows. This replacement file provides
additional enhancements to the original ATTMAIL.DLL file, correcting
the following problems:

 - The AT&T(R) driver loses the remainder of the message body when a
   null character is detected.

 - Sending a mail message with an attachment from version 3.2 of
   Microsoft Mail for Windows through the AT&T gateway to an AT&T mail
   account that is using version 3.2 of Microsoft Mail Remote for
   Windows, with the AT&T driver selected, will have a single
   attachment split into two separate files.

To replace your ATTMAIL.DLL file
--------------------------------

1. Verify that the AT&T Mail driver is the current driver in the Mail
   System Selector (MAILDRV.EXE) by running the Mail System Selector
   from Program Manager, selecting AT&T Mail, and choosing Set As
   Current Mail Driver.

2. Insert the enclosed WA0952 disk in your floppy disk drive.

3. At the MS-DOS command prompt, type the following and press ENTER

      copy <drive>:\attmail.dll <destination>

   where <drive> is the floppy disk drive containing the WA0952 disk
   and <destination> is the drive and directory where your ATTMAIL.DLL
   file currently resides. For example, if ATTMAIL.DLL is located in
   the Windows SYSTEM subdirectory on drive C and the WA0952 disk is
   in drive A, type the following command:

      copy a:\attmail.dll c:\windows\system

   A message will be displayed stating: 1 file(s) copied. This
   indicates that your ATTMAIL.DLL file has been successfully
   replaced.