DOCUMENT:Q168469 TITLE :RRAS Upgrade for WinNT Server 4.0 Hotfix Pack 2.0 Release Notes PRODUCT :Microsoft Windows NT PROD/VER:4.0 OPER/SYS:WINDOWS KEYWORD :kbfix4.00 kbfile --------------------------------------------------------------------------- The information in this article applies to the following: - Microsoft Windows NT Server version 4.0 - Routing and Remote Access Service Update for Windows NT Server version 4.0 --------------------------------------------------------------------------- SUMMARY ======= This article contains a copy of the Routing and Remote Access Upgrade for Microsoft Windows NT 4.0 Server Hotfix Pack 2.0 Release Notes. Version 2.0 has been replaced by version 3.0. Routing and Remote Access Upgrade for Microsoft Windows NT 4.0 Server Hotfix Pack 3.0 is available at: ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/NT40/ hotfixes-postSP3/rras30-fix/ NOTE: The above link is one path; it has been wrapped for readability. You can find the original version at the following Microsoft ftp site: ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/NT40/ hotfixes-postSP3/archive/rras20-fix/ NOTE: The above link is one path; it has been wrapped for readability. WARNING: If you install the original (archived) version of this hotfix AFTER you apply the later version, your system may become unusable. Microsoft does not recommend you install the original hotfix after applying the later version. MORE INFORMATION ================ Routing and Remote Access Upgrade for Microsoft Windows NT 4.0 Server Hotfix Pack 2.0 Release Notes Please use this document to address questions which may arise during the installation of this Routing and Remote Access Hotfix Pack 2.0 for Microsoft Windows NT 4.0 Server. ---------------------------------------------------------------------- Contents - Information on Installation - List of issues addressed - Known Problems - Fixes and Features included from Hotfix Update 1.0 ---------------------------------------------------------------------- Information on Installation --------------------------- This Hotfix Pack requires that you already have Routing and Remote Access Service for Windows NT 4.0 Server installed on your system. Note that you must first apply the Windows NT 4.0 PPTP Update before applying the RRAS hotfix 2.0. This release includes the features and fixes from Routing and Remote Access Hotfix Update 1.0. This Hotfix is packaged in an auto-install format. Copy the Hotfix to a temporary directory, and double-click the executable name or type the executable name "rrasfixi.exe" for x86, or "rrasfixa.exe" for alpha at a command prompt to install. The files can also be extracted from the Hotfix Pack without installing them. To do this, copy the Hotfix to a temporary directory, and type "rrasfixi /x" or "rrasfixa/x" at a command prompt (without the quotation marks). After extracting the files, the Hotfix can be installed by typing hotfix at a command prompt. To uninstall this update, type "HOTFIX -Y" (without quotation marks) from the directory you copied the files to. Output of "HOTFIX -?": HOTFIX [-y] [-f] [-n] [-z] [-q] [-m] [-l] -y Perform uninstall (only with -m or -q) -f Force apps closed at shutdown -n Do not create uninstall directory -z Do not reboot when update completes -q Quiet or Unattended mode with no user interface -m Unattended mode with user interface -l List installed hotfixes List of Issues Addressed ------------------------ NT Issues Performance Issues: - This release includes an enhancement to TCP/IP that will improve the performance of TCP-based applications over high latency networks, such as the Internet. Routing Issues: - Added new Demand dial filters. You can now keep demand dial interfaces from dialing by setting filters using the Routemon.exe command with a new "Filtertype= Dial" option. The new syntax for this is the same for setting Input and Output filters using Routemon.exe, and can be seen by typing "routemon ip set filter /?" at a command prompt. The following is an example of the syntax used to prevent a demand dial interface from dialing: C:\>routemon ip add filter myremoterouter dial 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 any C:\>routemon ip set filter myremoterouter dial forward NOTE: The first example above is one line; it has been wrapped for readability. For more information on using the Routemon.exe command to set filters, please see the Routing and Remote Access Administrator's Guide. - Added the capability to filter fragmented IP packets. Two registry keys control this functionality. HKEY_LOCAL_MACHINE\System|CurrentControlSet\IPFilterDriver \Parameters EnableFragmentChecking REG_DWORD Setting this to 1 enables fragment checks DefaultForwardFragments REG_DWORD Setting this to 0 causes the filterdriver to drop fragments if they don't match a previous header. - Changes were made to the Router's Radius client to address a duplicate Acct-Session-Id accounting problem, as well as an issue that caused the reversal of the FramedIPAddress returned from a Radius server. In addition, the RADIUS client now sends the NAS-Port-Type and Acct- Session-Time attributes. - Resolved an issue that used to cause a hang in the OSPF subagent during an SNMP Walk. - Resolved issue that used to cause an Access Violation when adding a Virtual Interface right after configuring an Area under OSPF routing. Adjusted the RIP Authentication type to 2 instead of 1, per RFC 1388. NOTE: This update must be applied to all Routing and Remote Access routers if you are using RIP2 authentication. - Resolved issue which could cause Mprouter to hang when doing an "ipconfig /release". - Made a change that ensures that periodic RIP route updates will resume each time a demand-dial interface is reactivated. Known Problems in this Update ----------------------------- - Although there is a checkbox in the Global IP Config dialog to enable/disable filtering, at this time the only functionality it has is to visually show you if any filters have been configured on your interface(s). Regardless, the filter driver is always enabled. In order to disable filtering on an interface, you must use the per interface option in the Interface IP Config dialog. - Even though the "Filtertype= Dial" option has been properly configured for a demand dial interface, it might still be possible for that interface to dial. This will only occur if you are pinging from the command line of the Routing and RAS server in which the demand dial interface is configured. Fixes and Features Included from Hotfix Update 1.0 -------------------------------------------------- New Features Added in Hotfix 1.0: - Allowing PPP clients to connect without authentication This can be accomplished by altering the default registry key as shown: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Rasman \PPP\ForceEncryptedPassword (DWORD) 3 allows the server to accept incoming PPP clients without authentication. - Using MS-CHAP with Radius authentication In order to enable MS-CHAP with RADIUS authentication, you must add a registry value HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Rasman \PPP\CHAP\OfferMSCHAP and set it to (DWORD) 1. Once this is enabled every incoming PPP connection will be offered MS- CHAP, and MS-CHAP will be used to authenticate each PPP user against the Radius server that your RAS server is using. List of Issues Fixed in Hotfix Update 1.0: All bug fixes contained in this hotfix are listed below. You can query the Microsoft Knowledge Base (KB) to find an article about a specific bug by using the KB Qxxxxxx number that is assigned to the bug. The Microsoft Knowledge Base can be found on the Microsoft Web site at http://support.microsoft.com/support/. KB# Brief Description ----------------------------------------------------------------------- Q172290 Routing and Remote Access "Out of Buffers" Event Logs Q176689 RRAS Requires hotfix when Using Proxy 2.0 Q173533 WinNT Radius Client Sends Incomplete Accounting Information Q176506 Radius Accounting Only Logs One Entry for Multilink Client Q173532 Radius Authentication Causes Access Violation in Mprouter.exe Q172512 Routing and Remote Access Event ID 20100 Q176502 RAS Authentication Rechallenge Resets Compression Flag Q176209 RAS or RRAS Server Fails to Answer Incoming Calls Q167038 RAS Clients Run Winsock and RPC Applications Slowly Q171061 RIP Does Not Advertise Zero Subnets Q160517 RRAS May Decrement Local Static Route Metric Q176082 RRAS Server Updates Link State Database but not Route Table Q162834 RRAS Stops Routing After Encountering Zero Checksum Q104296 RRAS Uses Larger MTU Than Other OSPF Routers Information in this document is subject to change without notice and is provided for informational purposes only. The entire risk of the use or results of the use of this document remains with the user, and Microsoft Corporation makes no warranties, either express or implied. The names of companies, products, people, characters, and/or data mentioned herein are fictitious and are in no way intended to represent any real individual, company, product, or event, unless otherwise noted. Complying with all applicable copyright laws is the responsibility of the user. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Microsoft Corporation. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. (c) 1998 Microsoft Corporation. All rights reserved. Microsoft, MS-DOS, MS, Windows, Windows NT, are either registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and/or other countries. Other product and company names mentioned herein may be the trademarks of their respective owners. Additional query words: 4.00 rras ============================================================================ THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.