|
Intel® Desktop Board PR440FX |
The products you are looking for are no longer manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future content updates or software updates to support new operating systems or improve compatibility with third party devices and software products. THESE PRODUCT SUPPORT DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "TERMS OF USE" INFORMATION. Information on currently available Intel products is available at www.intel.com and/or developer.intel.com Any links to internet Web sites will require an internet connection |
Warning: Processors not specifically listed by type and rated speed may have requirements that are not supported by the motherboard's design. Use of unsupported processors may result in improper operation, damage to the motherboard or processor, or reduced product life.
The following table shows the processor steppings that have been qualified with the Intel PR440FX Motherboard:
|
Intel PR440FX Motherboards with BIOS versions 1.00.02.DI0 or earlier cannot be reliably operated with sB1 stepping Pentium Pro processors. The failure symptoms include a) no video accompanied by a blinking power LED, b) failure to recognize the second processor in a dual processor configuration, or c) random system crashes. If BIOS version 1.00.02.DI0 is installed, you may be able to upgrade to the latest BIOS version; this must be done with a single processor installed. If the system has two processors installed, remove the second processor before attempting the upgrade. If the BIOS upgrade procedure fails, or if BIOS version 1.00.01.DI0 is installed, replace the sB1 stepping processor with an sA1 stepping processor and then upgrade to the latest BIOS version. Once the BIOS upgrade is complete you may reinstall the sB1 stepping processor(s).
Type of second Pentium Pro processor that should be used on the Intel PR440FX Motherboard
The second Pentium Pro processor on the Intel PR440FX Motherboard must be the same speed and a second-level cache size as the first processor. The second processor must also be the same stepping as, or no more than one stepping higher or lower than the primary processor. In the following table, only the combinations of primary and secondary processors marked "YES" are qualified for use in dual processor Intel PR440FX Motherboards.
|
When the Intel VRM need to be used
Motherboards with two processors require a VRM. There are two types of VRMs: 5V and 12V. The Intel® PR440FX Motherboard supports 5V modules. Please refer to the Intel PR440FX Technical Product Specification and Motherboard Specification Update for details.
The following table shows examples of possible memory combinations. Not all possible combinations are shown. The Intel® PR440FX Motherboard supports EDO DRAM DIMMs.
|
|