************************************************************ * * Production Version Release * Graphics Driver for * Intel(R) 810/810E/810E2/815/815E/815EM/815G/815EG Chipsets * Microsoft* Windows* 2000 * Microsoft* Windows* XP * Driver Revision: 6.13.01.3004 * * 6.6 Production Version * * * February 11, 2002 * * NOTE: This document refers to systems containing the * following Intel products: * * Intel(R) 810 Chipset * Intel(R) 810E Chipset * Intel(R) 810E2 Chipset * Intel(R) 815 Chipset * Intel(R) 815E Chipset * Intel(R) 815EM Chipset * Intel(R) 815G Chipset * Intel(R) 815EG Chipset * * * Installation Information * * * This document makes references to products developed by * Intel. There are some restrictions on how these products * may be used and what information may be disclosed to * others. Please read the Disclaimer section and contact * your Intel field representative if you would like more * information. * ************************************************************ ************************************************************ * DISCLAIMER: Intel is making no claims of usability, * efficacy or warranty. The INTEL SOFTWARE LICENSE AGREEMENT * contained herein completely defines the license and use of * this software. ************************************************************ ************************************************************ ************************************************************ * CONTENTS OF THIS DOCUMENT ************************************************************ This document contains the following sections: 1. System Requirements 2. Localized Language Abbreviations 3. Installing the Software 4. Verifying Installation of the Software 5. Identifying the Software Version Number 6. Uninstalling the Software 7. Setup Installation Switches Available 8. Self-Extracting EXE Installation Switches Available ************************************************************ * 1. SYSTEM REQUIREMENTS ************************************************************ 1. The system must contain one of the following Intel Chipsets: Intel(R) 810 chipset Intel(R) 810E chipset Intel(R) 810E2 chipset Intel(R) 815 chipset Intel(R) 815E chipset Intel(R) 815EM chipset Intel(R) 815G chipset Intel(R) 815EG chipset 2. The software should be installed on systems with Microsoft Windows 2000 with at least 64 MB of system memory or Microsoft Windows XP with at least 128 MB of system memory. 3. There should be sufficient hard disk space in the directory on the system in order to install this software. The drivers included with this distribution package are designed to function with all released versions of Microsoft Windows 2000 and Microsoft Windows XP. Please check with your system provider to determine the operating system and Intel(R) Chipset used in your system. ************************************************************ * 2. LOCALIZED LANGUAGE ABBREVIATIONS ************************************************************ The following list contains the abbreviations of all languages into which the driver has been localized. You may have to refer to this section while using this document. chs -> Mainland Chinese cht -> Traditional Chinese dan -> Danish deu -> German eng -> International English enu -> English esp -> Spanish fin -> Finnish fra -> French frc -> French Canadian ita -> Italian jpn -> Japanese kor -> Korean nld -> Dutch nor -> Norwegian plk -> Polish ptb -> Brazilian Portuguese ptg -> Portuguese rus -> Russian sve -> Swedish tha -> Thai ************************************************************ * 3. INSTALLING THE SOFTWARE ************************************************************ General Installation Notes: 1. The operating system must be installed prior to the installation of the driver. NOTE: When upgrading from Windows 98 or Me, Windows* XP may indicate that the graphics driver should be upgraded first. You should continue to install the operating system and only install the graphics driver after the Windows XP operating system installation is complete. 2. This installation procedure is specific only to the version of driver and installation file included in this release. 3.1 INSTALLSHIELD (AUTOMATED) INSTALL FROM CD-ROM or WEB DOWNLOAD 1. To install from a CD, insert the CD-ROM. If autorun is enabled, the installer will begin automatically. Otherwise, enter the "Graphics" directory on the CD-ROM and double-click "SETUP.EXE". Continue on to step 3. 2. To install from a Web download, you will download either a ZIP file or an EXE file from the Web. a. If it is an EXE file, double-click the file you downloaded and the Read Me file will be displayed. Click "Next". Choose a location to Save the installation files and click "Next". If an "Overwrite Protection" window appears, click "Yes to All" so that the installation files are replaced with the version you are installing. Continue on to step 3. b. If it is a ZIP file, you must unzip it using a utility such as WinZip* or PKZip*, then enter the directory into which you unzipped the files. Enter the "Graphics" subdirectory and double-click "SETUP.EXE". Continue on to step 3. 3. Click "Next" on the Welcome screen. 4. Read the license agreement and click "Yes" to continue. 5. The driver files will now be installed. When the install finishes, choose the "Yes.." option to restart, and click "Finish" to restart your computer. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. 3.2 MANUAL INSTALL FROM WEB DOWNLOAD (WINDOWS XP INSTRUCTIONS) 1. Download "WIN2K_XP##.ZIP" from the Web, where "##" is the driver version. You must unzip it using a utility such as WinZip* or PKZip*. Transfer the files to a CD if you wish to install from the CD-ROM. 2. Click the "Start" button. 3. Click the "Control Panel" icon. 4. If the Control Panel is currently in Category View, click the "Switch to Classic View" link on the left side. 5. Click the "Display" icon. You should be in the "Display Properties" window. 6. Click on the "Settings" tab. 7. Click the "Advanced" button. 8. Click the "Adapter" tab. 9. Click the "Properties" button. 10. Click on the "Driver" tab. 11. Click the "Update Driver..." button. 12. The "Hardware Update Wizard" window should now open. 13. Select the following option: "Install from a list or specific location (Advanced)". Click the "Next" button. 14. Select the following option: "Don't search. I will choose the driver to install". Click the "Next" button. 15. Click the "Have Disk" button. Click "Browse...". 16. Enter the directory where you unzipped WIN2K_XP##.ZIP and then enter the "Graphics" subdirectory. Next, enter the "WIN2000" subdirectory. At this point, the "I81XNT5.INF" file should be highlighted. Click "Open". 17. Click "OK". The "Select Device" screen should open and it may have several options to choose from. Select the display adapter that your system contains. Click "Next". If a warning appears saying that Windows cannot verify that this device driver is compatible with your hardware, click "Yes." 18. The driver should install. Click "Finish" when done. 19. Click "Close" and click "Yes" to reboot. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. 3.3 MANUAL INSTALL FROM WEB DOWNLOAD (WINDOWS 2000 INSTRUCTIONS) 1. Download "WIN2K_XP##.ZIP" from the Web, where "##" is the driver version. You must unzip it using a utility such as WinZip* or PKZip*. Transfer the files to a CD if you wish to install from the CD-ROM. 2. From the desktop, click on "My Computer". 3. Click the "Control Panel" item. 4. Click the "System" icon. You should be in the "System Properties" window. 5. Click on the "Hardware" tab 6. Click the "Device Manager" button. 7. Double-click the "Display Adapters" icon. 8. The current list of adapters is displayed. 9. Click on the adapter (e.g., VGA) that this driver is replacing. 10. Click on the "Driver" tab. 11. Click the "Update Driver..." button. 12. The "Upgrade Device Driver Wizard" window should now open. 13. Click the "Next" button. 14. Select the following option: "Display a list of the known drivers for this device so that I can choose a specific driver". Click the "Next" button. 15. Click the "Have Disk" button. Click "Browse...". 16. Enter the directory where you unzipped WIN2K_XP##.ZIP and then enter the "Graphics" subdirectory. Next, enter the "Win2000" subdirectory. At this point, the "I81XNT5.INF" file should be highlighted. Click "Open". 17. Click "OK". The "Select Device" screen should open and it may have several options to choose from. Select the display adapter that your system contains. Click "Next". If a warning appears saying that Windows cannot verify that this device driver is compatible with your hardware, click "Yes." 18. Click "Next". The driver should install. Click "Finish" when done. 19. Click "Close" and click "Yes" to reboot. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. ************************************************************ * 4. VERIFYING THE INSTALLATION OF THE SOFTWARE ************************************************************ 4.1 VERIFYING THE INSTALLATION (WINDOWS XP INSTRUCTIONS) 1. Click the "Start" button. 2. Click the "Control Panel" icon. 3. If the Control Panel is currently in Category View, click the "Switch to Classic View" link on the left side. 4. Click the "System" icon. You should be in the "System Properties" window. 5. Click on the "Hardware" tab 6. Click the "Device Manager" button. 7. Double-click the "Display Adapters" icon. 8. The Intel(R) Graphics Controller should be listed. If not, the driver is not installed correctly. To check the version of the driver, refer to the section below. 4.2 VERIFYING THE INSTALLATION (WINDOWS 2000 INSTRUCTIONS) 1. From the desktop, click on "My Computer". 2. Click the "Control Panel" item. 3. Click the "System" icon. You should be in the "System Properties" window. 4. Click on the "Hardware" tab 5. Click the "Device Manager" button. 6. Double-click the "Display Adapters" icon. 7. The Intel(R) Graphics Controller should be listed. If not, the driver is not installed correctly. To check the version of the driver, refer to the section below. ************************************************************ * 5. IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ 5.1 IDENTIFYING THE VERSION NUMBER (WINDOWS XP INSTRUCTIONS) 1. Click the "Start" button. 2. Click the "Control Panel" icon. 3. If the Control Panel is currently in Category View, click the "Switch to Classic View" link on the left side. 4. Click the "Display" icon. You should be in the "Display Properties" window. 5. Click on the "Settings" tab. 6. Click the "Advanced" button. 7. Click on the "Intel(R) Graphics Technology" tab. The graphics driver version should be listed on this screen. 5.2 IDENTIFYING THE VERSION NUMBER (WINDOWS 2000 INSTRUCTIONS) 1. Click the "Start" button. 2. Click the "Settings" item. 3. Click the "Control Panel" item. 4. Click the "Display" icon. You should be in the "Display Properties" window. 5. Click on the "Settings" tab. 6. Click the "Advanced" button. 7. Click on the "Intel(R) Graphics Technology" tab. The graphics driver version should be listed on this screen. ************************************************************ * 6. UNINSTALLING THE SOFTWARE ************************************************************ 6.1 UNINSTALLING THE SOFTWARE (WINDOWS XP INSTRUCTIONS) 1. Click the "Start" button. 2. Click the "Control Panel" icon. 3. If the Control Panel is currently in Category View, click the "Switch to Classic View" link on the left side. 4. Click the "Display" icon. You should be in the "Display Properties" window. 5. Click on the "Settings" tab. 6. Click the "Advanced" button. 7. Click the "Adapter" tab. 8. Click on the "Properties" button. 9. Click the "Driver" tab. 10. Click the "Uninstall" button. 11. A "Confirm Device Removal" window appears. Click "OK", then click "Yes" when asked to restart the system. 6.2 UNINSTALLING THE SOFTWARE (WINDOWS 2000 INSTRUCTIONS) 1. Click the "Start" button. 2. Click the "Settings" item. 3. Click the "Control Panel" item. 4. Click the "Display" icon. You should be in the "Display Properties" window. 5. Click on the "Settings" tab. 6. Click the "Advanced" button. 7. Click the "Adapter" tab. 8. Click on the "Properties" button. 9. Click the "Driver" tab. 10. Click the "Uninstall" button. 11. A "Confirm Device Removal" window appears. Click "OK", then click "Yes" when asked to restart the system. ************************************************************ * 7. SETUP INSTALLATION SWITCHES AVAILABLE ************************************************************ The switches in the SETUP.EXE file will have the following syntax. Switches are not case sensitive and may be specified in any order (except for the -s switch). Switches must be separated by spaces. SETUP [-b] [-g{xx[x]}] [-overwrite] [-nolic] [-16x640x480x60] [-l{lang_value}] [-f2] [-s] -b Forces a system reboot after the installation completes when used with -s (silent mode). In non-silent mode, this switch has no effect. In silent mode, the absence of this switch forces the Setup.exe to complete without rebooting (the user must manually reboot to conclude the installation process). -g{xx[x]} Forces the configuration of a specific language version of the driver during the install. The absence of this switch will cause the installation to utilize the language of the OS locale as its default. Detailed requirements for the Install Dialog language settings are given in the Localized Language Abbreviations section. -overwrite Installs the graphics driver regardless of the version of previously installed driver. In non-silent mode, the absence of this switch will prompt the user to confirm overwrite of a newer Intel Graphics driver. In silent mode, the absence of this switch means that the installation will abort any attempts to regress the revision of the Intel Graphics driver. -nolic Suppresses the display of the license agreement screen. In non-silent mode, the absence of this switch will only prompt the user to view and accept the license agreement. The functionality of this switch is automatically included during silent installations. -16x640x480x60 (-xxx) Sets the four default display parameters: bits per pixel, pixels per line, pixels per column, and vertical refresh rate. -l{lang_value} Specifies the language used for the installation user interface. The absence of this switch will cause the installation to utilize the language of the OS as its default. Detailed requirements for the Install Dialog language settings are given in the Localized Language Abbreviations section. -s Run in silent mode. The absence of this switch causes the install to be performed in verbose mode. -f2 Specifies an alternate location and name of the log file created by a silent install. By default, Setup.log log file is created and stored during a silent install in the same directory as that of Setup.ins. ************************************************************ * 8. SELF-EXTRACTING EXE INSTALLATION SWITCHES AVAILABLE ************************************************************ For a driver that is packaged as a self-extracting EXE file, such as WINXXX.EXE, switches can be passed to SETUP.EXE by having them follow the -A switch for the self-extracting EXE file. WINXXX [-s] [-A ] -s Extract files to the TEMP directory in silent mode. The absence of this switch cause the self-extracting EXE to prompt the user for the path to extract the files. -A Used to pass parameters to SETUP.EXE. Switches for SETUP.EXE follow this switch. ************************************************************ * INTEL SOFTWARE LICENSE AGREEMENT * (OEM/IHV/ISV Distribution & Single User) ************************************************************ IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. Please Also Note: * If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV) this complete LICENSE AGREEMENT applies; * If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies. --------------------------------------------------------- For OEMs, IHVs, and ISVs: LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to You a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to: a) use, modify, and copy Software internally for Your own development and maintenance purposes; and b) modify, copy and distribute Software, including derivative works of the Software, to Your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single-User License Agreement, attached as Exhibit A; and c) modify, copy and distribute the end-user documentation that may accompany the Software, but only in association with the Software. If You are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then You may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation), to Your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof. You shall not otherwise assign, sublicense, lease or in any other way transfer or disclose Software to any third party. You shall not reverse-compile, disassemble or otherwise reverse-engineer the Software. Except as expressly stated in this Agreement, no license or right is granted to You directly or by implication, inducement, estoppel or otherwise. Intel shall have the right to inspect or have an independent auditor inspect Your relevant records to verify Your compliance with the terms and conditions of this Agreement. CONFIDENTIALITY. If You wish to have a third-party consultant or subcontractor ("Contractor") perform work on Your behalf that involves access to or use of Software, You shall obtain a written confidentiality agreement from the Contractor that contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose. Otherwise, You shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements or other announcements without Intel's prior written consent. You do not have any rights to use any Intel trademarks or logos. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and by international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material, physical defects for a period of ninety(90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. --------------------------------------------------------- EXHIBIT "A" INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. LICENSE. You may copy the Software onto a single computer for your personal, non-commercial use, and you may make one back-up copy of the Software, subject to these conditions: 1. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel components is not licensed hereunder. 2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software. 3. You may not reverse-engineer, decompile or disassemble the Software. 4. You may not sublicense or permit simultaneous use of the Software by more than one user. 5. The Software may contain the software or other property of third-party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material, physical defects for a period of ninety(90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. SLAOEMISV1/RBK/January 21, 2000 ************************************************************ ************************************************************ Information in this document is provided in connection with Intel products. Except as expressly stated in the INTEL SOFTWARE LICENSE AGREEMENT contained herein, no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, lifesaving, or life-sustaining applications. ************************************************************ * Intel Corporation disclaims all warranties and liabilities * for the use of this document, the software and the * information contained herein, and assumes no * responsibility for any errors which may appear in this * document or the software, nor does Intel make a commitment * to update the information or software contained herein. * Intel reserves the right to make changes to this document * or software at any time, without notice. ************************************************************ *Other names and brands may be claimed as the property of others Copyright (c) Intel Corporation, 1998-2003